CGYMK - COLORFLAKE-M SEALER COMP E
- MSDS: CGYMK
- Manufacturer: CROSSFIELD PRODUCTS CORP
- Product Name: COLORFLAKE-M SEALER COMP E
- National Stock Number: 5610-00N078760
Product Identification
Product ID:COLORFLAKE-M SEALER COMP E
MSDS Date:03/01/1993
FSC:5610
NIIN:00N078760
Kit Part:Y
MSDS Number: CGYMK
Responsible Party
RANCHO DOMINQUEZ, CA 90221
US
Emergency Phone: 310-886-9100
Info Phone: 310-886-9100
Cage: 60782
Contractor
Telephone: 310-886-9100
Cage: 60782
Ingredients
MODIFIED ETHER OF BISPHENOL-A EPOXY
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE SKIN & EYE
IRRITATION, INHALATION MAY INFLAME NOSE, THROAT, LUNGS. CHRONIC:
MAY CAUSE DERMATITIS. EXCESSIVE EXPOSURE TO MIST OR VAPOR MAY HAVE
TOXIC EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:MOVE TO FRESH AIR--GIVE OXYGEN IF NECESSARY. EYES:FLUSH
WITH WATER FOR AT LEAST 15 MINUTES--GET MEDICAL ATTENTION IF
IRRITATION PERSISTS. SKIN:WASH WITH SOAP AND WATER--REMOVE
CONTAMINATED CLOTH ING. INGEST:INDUCE VOMITING AND CALL PHYSICIAN.
Fire Fighting
Flash Point:310F,154C
Extinguishing Media:FOAM, CO*2.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC, VAPORS HEAVIER THAN AIR.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION. PICK UP MATERIAL
AFTER BEING ABSORBED ON SAND, PERLITE, ETC. AND PLACE IN CLOSABLE
METAL CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, OPEN
FLAMES. USE EYE AND SKIN PROTECTION DURING APPLICATION.
Other Precautions:USE GOOD VENTILATION DURING APPLICATION OF THIS
PRODUCT. PART OF A MULTI COMPONENT SYSTEM.
Exposure Controls
Respiratory Protection:NIOSH APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST. MECHANICAL (GENERAL).
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . AS
NEEDED TO PROTECT SKIN.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
% VOLAT:0.2 (MAX).
Chemical Properties
Boiling Pt:B.P. Text:>380F,>193C
Spec Gravity:1.14 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, VERY PALE YELLOW LIQUID RESIN-MILD AROMATIC
ODOR.
Percent Volatiles by Volume:SUPDAT
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS--AMINE COMPOUNDS.
Stability Condition to Avoid:HIGH TEMPERATURES--STORE IN COOL DRY AREA.
Hazardous Decomposition Products:MAY FORM TOXIC COMPOUNDS, CARBON
MONOXIDE, ETC. WHEN HEATED.
Disposal
Waste Disposal Methods:DISPOSE OF IN SANITARY LANDFILL IN ACCORDANCE
WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.